Description
ETCnomad
Lighting control wherever you want to go
Hopping from gig to gig and can’t bring your console with you? Doing the lighting in a venue whose desk has seen better days? Want to unlock multiple platforms with just one device? That’s where ETCnomad control comes in. Small enough to fit on your keychain, the ETCnomad USB plugs into your computer and opens up the power of Eos, Cobalt, and High End Systems’ Hog 4 PC software, so you can program and run shows anywhere.
It can serve as a primary controller, a backup, or a client device ? or work offline entirely ? operating on either a PC platform running Microsoft Windows? 7 or higher, or natively on a Mac running Mojave (v10.14) or later.
ETCnomad is available in a base or unlocked version. The base unit supports 1024 outputs while the unlocked version supports 6144. (Note that Eos Software 2.8.X or earlier unlocks the base at 512 rather than 1024.)
Note that without the USB key, the software functions in offline or mirror mode. The ETCnomad is upgradeable to reach maximum capacity.
Compatibility
Supported protocols include Net3/ACN/sACN and Art-Net
Net3/Response DMX/RDM Gateways
Net 3 Show Control Gateway and I/O Gateway
Response MIDI and SMPTE Gateways
Eos Programming Wing
Eos Motorized Fader Wing 10 or 20
Eos Fader Wing 20 or 40
ETC Gadget II USB-to-DMX/RDM converters (up to four may be connected for a total of four local outputs)
iRFR, iRFR Preview and aRFR
ETCpad (ETC Portable Access Device)
Third-party USB-MIDI panels via Direct MIDI
When you use it as a primary or backup, the system output is determined by the device with the lowest output configuration. When it’s connected as a client, the output capacity of ETCnomad is ignored.
To find out what features are supported and to see user-interface descriptions, check out the Eos Family and Element documentation
